SSS.8.1.31 - Suppressed .45 ACP Pistol Hazards - Rugged Obsidian 45 Silencer Hazard Map Brief
/Rugged Obsidian 45 in Long and Short Configurations on the 1911 Full-Size Semiautomatic .45 ACP Pistol - Hazard Map
This Silencer Hazard Map Brief documents the free field blast overpressure hazards from the Rugged Obsidian 45 silencer in both its long and short configurations fielded on the 1911 semiautomatic combat handgun firing Speer Lawman 230gr .45 ACP ammunition, as evaluated in technical Report 6.234 and as tabulated in record numbers 7.1.273 and 7.1.274 in the Rankings, respectively.
The average Suppression Rating hazard contours at 1.6 m silencer end cap elevation from the instrumented blast test of the long configuration of the Obsidian 45 silencer computed with the PEW-SOFT HD Blast Hazard Prediction Tool are shown in Figure 1. Similarly, the hazard contours with the short configuration of the silencer are shown in Figure 2. The Suppression Rating hazard scale is shown in Figure 3. Ground-truth anchored Suppression Ratings from the technical reports are annotated 1.0 m left of the end cap (SR_muzzle) and 6 inches right of the shooter’s right ear (SR_ear) on both maps. Computational parameters and blast overpressure hazard field observations are provided below.
8.1.31.1 PEW-SOFT HD Computational Model Parameters
PEW-SOFT HD code Version 2.2.7 Alpha was used.
Contour elevation is 1.6 m above grade. No reflecting surfaces, other than the ground, are present in the model.
Grid resolution is 0.076 m (3 in).
The average semiautomatic jet stability index sigma_sa of the long configuration of the silencer is 1.0. the index for the short configuration of the silencer is 0.36.
8.1.31.2 Rugged Obsidian 45 Suppression Hazard Map Observations:
The Rugged Obsidian 45 is a modular silencer that produces varying blast load propagation and personnel hazard fields based on its length configuration. Blast load input amplitude into the silencer may be considered moderate from the 5.5 inch long 1911 barrel. In its full-length 12-baffle configuration, blast load output from the distal end of the silencer is very controlled. When converted to its short 8-baffle configuration by removing the front module, late-time flow rate increases significantly, resulting in higher amplitude muzzle blast and faster blowdown.
In the long configuration, forward field hazard severity is significantly reduced, producing pure muzzle suppression that slightly exceeds even the legacy AAC Ti-RANT 45. However, because the Rugged Obsidian 45 generates high early-time back pressure, significant ejection port blast loads propagate into the rear field near the operator. Despite the favorable lock time mechanics of the linked tilting barrel in the 1911 pistol, this elevated back pressure drives operator risk in the rear field. When shortened to the 8-baffle configuration, late-time back pressure is reduced, but the high early-time back pressure inherent to the primary proximal section remains unchanged. Coupled with the much more severe muzzle blast propagating from the closer end cap to the shooter's head position, the overall hazard field broadens and net operator protection drops further.
Both the long and short configurations of the Rugged Obsidian 45 provide relatively consistent hazard fields after the first shot, with minor first-round-pop (FRP) divergence that is well controlled in the long configuration and more pronounced in the short configuration.
fig 1. Rugged Obsidian 45 (Long Configuration) 1911 Free Field Hazard Map Produced by PEW-SOFT HD Blast Hazard Prediction Tool using PEW Science Test Data
fig 2. Rugged Obsidian 45 (Short Configuration) 1911 Free Field Hazard Map Produced by PEW-SOFT HD Blast Hazard Prediction Tool using PEW Science Test Data
Fig 3. PEW Science Suppression Rating Scale