SSS.8.1.41 - Suppressed 9mm Pistol Hazards - Canik VOID-9 Silencer Hazard Map Brief

Canik VOID-9 on the HK P30L Full-Size Semiautomatic Pistol - Hazard Maps

This Silencer Hazard Map Brief documents the free field blast overpressure hazards from the Canik VOID-9 silencer fielded on 5-in barrel HK P30L semiautomatic combat handgun firing Speer Lawman 147gr 9x19mm ammunition with both its Solid and Vented end caps as evaluated in technical Report 6.244 and as tabulated in record numbers 7.1.290 and 7.1.291 in the Rankings, respectively.

The average Suppression Rating hazard contours at 1.6 m silencer end cap elevation from the instrumented blast test of the silencer with its Solid end cap on the HK P30L computed with the PEW-SOFT HD Blast Hazard Prediction Tool are shown in Figure 1.  Hazard contours for the silencer with its Vented end cap are shown in Figure 2.  The Suppression Rating hazard scale is shown in Figure 3.  Ground-truth anchored Suppression Ratings from the technical reports are annotated 1.0 m left of the end cap (SR_muzzle) and 6 inches right of the shooter’s right ear (SR_ear).  Computational parameters and blast overpressure hazard field observations are provided below.

8.1.41.1 PEW-SOFT HD Computational Model Parameters

  1. PEW-SOFT HD code Version 2.2.8 Alpha was used.

  2. Contour elevation is 1.6 m above grade. No reflecting surfaces, other than the ground, are present in the model.

  3. Grid resolution is 0.076 m (3 in).

  4. The average semiautomatic jet stability index sigma_sa of the silencer with its Solid end cap is 0.64.  With its Vented end cap, the silencer has a lower jet stability index of 0.52.

8.1.41.2 Canik VOID-9 Suppression Hazard Map Observations:

The Canik VOID-9 is a mid-size hybrid centerfire pistol silencer that utilizes Otter Creek Labs Infinity technology to produce balanced blast load propagation and adjustable hazard fields based on end cap selection. Blast load input amplitude into the silencer may be considered moderate, as the barrel length of the HK P30L test host is 5.0 inches long firing full-power subsonic 9x19mm ammunition.

The Solid end cap configuration produces controlled forward jetting. Because the Vented End Cap expels combined axial bore and annular gas at a higher distal flow rate, the forward hazard contours broaden slightly compared to the Solid End Cap configuration. In the rear field near the operator, however, the risk profile reverses significantly. Although the Solid End Cap benefits from early-time annular volumetric expansion, sealing the distal annulus increases internal impulse accumulation and weapon backpressure. Installing the Vented End Cap relieves this late-time restriction, significantly reducing ejection port blast coalescence and piston/slide mechanical shock at the operator's head. Consequently, the rear hazard field becomes less severe with the Vented End Cap.

Both configurations of the Canik VOID-9 provide consistent hazard fields after the first shot, though first-round-pop (FRP) behavior differs between the two end caps, with the Solid End Cap FRP being more severe across the hazard field.

fig 1. Canik VOID-9 (Solid End Cap) HK P30L 9mm Pistol Free Field Hazard Map Produced by PEW-SOFT HD Blast Hazard Prediction Tool using PEW Science Test Data

fig 2. Canik VOID-9 (Vented End Cap) HK P30L 9mm Pistol Free Field Hazard Map Produced by PEW-SOFT HD Blast Hazard Prediction Tool using PEW Science Test Data

Fig 3. PEW Science Suppression Rating Scale